Remove the cap of any shampoo, conditioner, or body wash bottle (10-18 fl. oz. / 290-520mL). Wet the inside surfaces of the Squeezi sleeve and slide it over the bottle.
Mount the suction cup on any clean smooth surface. Use the adhesive-backed disc for textured or tiled walls. Remove the protective film on the disc prior to installation.
Hang the Squeezi on the suction cup nub by sliding it downwards until it is secure.
Squeeze the bulb to dispense the desired amount of product.
Frequently Asked Questions
What is the easiest way to insert and remove the bottle from the Squeezi?
Wet the inside of the silicone sleeve with water to help it slide over the bottle easier.
My new Squeezi doesn't appear to have a slit. What do I do?
The slit (opening) in the Squeezi can sometimes seal tightly during transit. Pinch the tip of the dispense bulb to loosen the seal and reopen the slit. This only occurs occasionally on brand new Squeezi units. If you need further assistance just reach out to our customer service team and we'll be happy to help.
What is the best way to mount the Squeezi?
The heavy duty suction cup can securely mount the Squeezi on smooth clean vertical surfaces. We recommend properly cleaning and drying the mounting surface before attaching the suction cup. We advise against wetting the suction cup before installation since this may cause it to slide down the wall.
Install the adhesive-backed mount disc on tiled/textured walls in order to give the suction cup a smooth surface to mount to. We recommend properly cleaning and drying the mounting surface before attaching the adhesive-backed mount disc. To install the disc, remove the backing paper to expose the sticky adhesive surface. Press and hold the adhesive surface against the wall firmly for at least 30 seconds. Install the suction cup onto the smooth surface of the adhesive-backed mount disc.
Does the Squeezi work with thick and thin liquids?
Yes! The Squeezi was designed to work with thin shampoos as well as thick conditioners. The squeeze bulb fills with liquid when the bottle is inverted and you're ready to dispense. Thick liquids may take a little longer to initially fill the bulb. A hard shake can speed up the process.
Can I use the Squeezi with food and drink products?
No. Do not use the Squeezi with food or beverages. The Squeezi is for use with shampoo, conditioner, and body wash only.
What size bottles does Squeezi work with?
The Squeezi was designed to fit most 10-18 oz. (290-530 mL) bottles.
What's the best way to remove the adhesive-backed mount plate?
The easiest method to remove the mount plate is to slide a piece of dental floss behind the disc to separate the adhesive from the wall. Applying a little heat with a hair dryer can help soften the adhesive. Once the disc is removed from the wall use rubbing alcohol or an adhesive remover (e.g. Goo-Gone or Goof Off) to clean off any remaining residue. Please keep in mind that once the disc is removed it is not reusable.
When will more colors be available?
We will be adding more Squeezi color options soon so stay tuned! Reach out on social media with color recommendations.
Squeezi Material: Silicone
Suction Cup Material: PVC
Adhesive Mount Disc Material: ABS
The Squeezi is made from high purity silicone that is compatible with most shampoo, conditioner, and body wash products. However, we cannot guarantee compatibility with every type of fluid. It is the user's sole responsibility to check product compatibility with the Squeezi before use.
We do not recommend the Squeezi be used with any of the following:
- Salicylic acid (commonly found in acne treatment products)
- Hair serums and treatments (e.g. hair relaxers, volumizers, detanglers, smoothers, shine enhancers, etc.)
- Products containing Argan Oil
- Products containing alcohol (e.g. make-up remover, shaving cream, aftershave, etc.)
- Insect repellents containing DEET
- Hydrogen Peroxide
- Silicone-based lubricants
- Contact lens solution
- Cleaning solutions (e.g. bleach, household chemicals, etc.)
- Caustic, acidic, corrosive, or flammable products
Squeezi Safety Warnings
Do not mount above someone’s head.
Do not use with oversized bottles. Product designed for use with 10-18 oz. (290-520mL) bottles.
Check surroundings for slipping hazards (e.g. shampoo drips) before entering shower/bath or other area of use.
Do not eat or drink out of this product. It is not sterile.